Galvanic automanipulators - JSC "Tagat" them. S.I. Livshits

Auto operators are designed for transporting processed parts (products) on suspensions and in drums in electroplating and chemical processing lines.

The different versions of manipulators:

suspended double-rails for straight lines;
portals for straight lines;
suspended monorails for oval lines;
cantilever side arrangement for small-sized baths (up to 1200 mm long);
auto operator with pallet

special (designed and manufactured according to the customer’s technical specification)

Technical specifications


№ п.п.	Designation	Autooperator type	Load capacity	The maximum size of the service baths, mm			Height of the rail track above the side of the bath, mm	Speed m / s		Installed power of electric drives. KW		Weight, kg	Note
				length	width	высота		movements	lifting up	movements	lifting up
1	2	3	4	5	6	7	8	9	10	11	12	13	14
1	ГМ001.000	Double-rail suspension for suspensions and drums	400	3 000	1 200	2 000	-	0,25-0,5	0,137	0,55	1,25	340	*
2	Г005.000	Double-rail suspension	1000	3 000	1 200	2 000	-	0,25	0,067	0,55	1,7	445	*
3	ГМ 537.000	Double-rail suspension	400	2 240	1 200	2 000	-	0,58	0,21	1,1	2,2	420	*
4	ГМ002.000	Monorail suspension for suspensions and drums	400	2 240	1 200	2 000	-	0,3	0,137	0,12-2	1,1	298	*
5	101735.15.000	Portal for drums and suspensions	400	2 240	1 200	1 600	460	0,1-0,5	0,1-0,14	0,75	1,5	730	*
6	101823.046.000	Console mode	75	1 120	400	800	-	0,2	0,2	0,37	0,55	230	*
7	8275.000	Double-rail suspension	700	2 500	900	1 600	-	1,5	0,2	1,1	3	1300	*
	** Auto operators G001. 000, G002. 000, G007. 000 are not used in new developments, but can be produced as spare parts. Also, according to the technical requirements of the Customer, it is possible to manufacture other modifications of auto operators, including those with a belt or chain lift drive.